Service & Repair Works of Air Handling Units in UAE – Performance Options

Introduction:

To have good ventilation, one needs to pay enough attention to their HVAC and Air Handling Units. They can be used in residential as well as in commercial application and can be counted upon as the best possible solution when it comes to making optimum use of the temperature in your building. There are
many different types of air handling units and they can be installed both at the top as well as at the bottom. However, there are some general services that you must engage in while repairing and overhauling them.

Basic information about air handling units

Air handling units are major components of air conditioning systems, which are used to cool and heat the air. They can be either central or split-system units that have a duct system. When they are working properly, they distribute air throughout your home or office by pulling in outside air through an intake grill and pushing it through an exhaust grill.

The main purpose of air handling units is to provide comfort for people living or working in buildings. They work by using refrigerant gas (freon) to cool or heat the air that passes through them. They also come with filters that help remove dust from the room before circulating the fresh air around it.

Air handling units are available in different types depending on their function, performance levels and other features like energy efficiency rating (EER) and seasonal energy efficiency ratio (SEER). The EER refers to how much electricity a unit uses for cooling compared to SEER, which measures how much electricity is saved compared to older models over time based on its capacity rating.

On-Site Troubleshooting

The air handling unit is an important component for the smooth functioning of any commercial
building. If there is any malfunction in this system, the building will be affected by it. The problem can
be due to various reasons such as:-

● Improper maintenance
● Incorrect installation
● Defects in design
● Air temperature fluctuations
● Load variations
● Humidity levels
● Electrical problems/power interruptions
● Faulty filters/ducts
● Obstructed air flow from other units or ducts
● Improperly balanced fan speeds
● Air leaks in ductwork (leaks can be caused by partially closed dampers)

In order to save money, perform your own troubleshooting on your air handlers. When you find that your unit is not working, the first thing you should do is call a professional HVAC technician from District Cooling International LLC to diagnose the problem. Once they’ve done so, they can provide you with recommendations for repairs and maintenance to help keep your system running smoothly.

Complete Air Handling Unit Cleaning & Sanitation

A dirty air handling unit can be a significant source of indoor air quality problems. Dust and dirty particles that are generated by the unit are often circulated throughout the building, making it difficult to determine the source of indoor air quality issues.

Air handling units are designed to handle dust, dirt and other contaminants that may be generated by the equipment they serve. However, as units age, they become less efficient at filtering these contaminants out of the air stream.

At times, we find that cleaning and sanitising an air handling unit can significantly improve its ability to remove dust, dirt and other airborne contaminants from the conditioned space. In some cases, this can help resolve issues such as poor IAQ or poor ventilation performance in a commercial facility.

There are many reasons why you should consider a complete air handling unit cleaning and sanitation service:-

● To improve indoor air quality;
● To eliminate mould, mildew and other allergens;
● To prevent future problems;
● To extend the life of your HVAC system.

Replacement & Installation of Individual Air Handling Unit Components

The air handling unit is composed of several different components that can fail over time. These include the fan motor, blower wheel, belt and electrical components. Depending on the nature of your malfunctioning or damaged unit, we may advise you to replace some of these components. Some of the common air handling unit repairs include:

● Replacement of a faulty refrigeration system. This can occur due to a defective compressor or evaporator coil, among other things.
● Installation of a new compressor. If your compressor is old, worn out or has failed completely, it will need to be replaced.
● Replacement of an evaporator coil that has become damaged or has failed completely. An evaporator coil is part of the cooling system that absorbs heat from inside your home and transfers it outside through a refrigerant current.
● Replacement of an expansion valve (also known as an economizer). This device regulates the flow of refrigerant gas between the condenser and evaporator coils in your air conditioning system in order to achieve optimal efficiency levels.

Air Handling Unit in UAE – Repair and Overhauling

Repair and overhauling of air handling units is a very important service. It should be done by trained and experienced professionals only. This section will help you to understand the repairing process and how to distinguish between the two terms.

Air handling unit repair is necessary when your unit has malfunctioned. This can be due to many reasons, like poor maintenance, lack of lubrication or any other reason. If you are not sure about the cause of the malfunction, then it is best to get your air conditioner checked by an expert technician.

Once you have determined that your air conditioner needs repair, then you can approach a technician for repairs. However, you should also keep in mind that there are different types of repairs and they should all be done by certified professionals only.

You can go online and search for “air conditioning repair near me” and find a list of providers near your area who offer such services at affordable prices. These technicians will fix any kind of problem that may occur with your AC system including refrigerant leaks, cleaning coils and more other minor issues as well as major ones like replacing capacitors.

We also supply a wide range of LG air conditioning systems to our clients. We offer products from the following series of LG in the UAE: LG Chillers, LG Centrifugal, Absorption, Air Cooled & Water Cooled Screw Chillers and LG VRF Systems & SAC/RACs. To purchase quality HVAC systems from reputable brands like LG, call our sales team @ +971 4 339 7801.

Ultimate HVAC Performance Options

The performance options we present here will allow you to extend the life of your existing machinery.

Furthermore, they'll help keep you spending less on maintenance and repairs. Ultimately, they're designed to take advantage of established systems with proven reliability. With that in mind, you have nothing more to lose than some downtime and a little bit of money if you're considering them.

These services are not very different from each other. It is evident because choosing the top-rated air handling repair experts for your needs is not a cakewalk. If you don’t pick wisely, it can prove to be costly and more so, inconvenient. Email us on info@dci-me.com to book our best in the country HVAC
service and overhaul services.